Description

The LTC887x family of single-, dual-, and quad- channel amplifiers features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for a variety of battery-powered applications that require a good balance between cost and performance, such as audio outputs, motor phase current sensing, photodiode amplification and white goods. Featuring rail-to-rail input and output swings, a wide bandwidth of 20 MHz combined with low supply current (typical 1.12 mA at 5 V supply per amplifier) and low noise, the LTC887x family is an excellent choice for precision, low-current, low-voltage, battery-powered applications. The low input bias current supports these amplifiers to be used in applications with mega-ohm source impedances.
 
The robust design of the LTC887x amplifiers provides ease-of-use to the circuit designer:
integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electro-static discharge (ESD) protection (3 kV HBM). The LTC887x amplifiers are optimized for
operation at voltages as low as +1.8 V (±0.9 V) and up to +5.5 V (±2.75 V) at the temperature range of 0 ℃ to 70 ℃, and operation at voltages from +2.0 V (±1.0 V) to +5.5 V (±2.75 V) over the extended temperature range of −40 ℃ to +125 ℃.
 
The LTC8875 (single) is available in both SOT23-5L and SOIC-8L packages. The LTC8876 (dual) is offered in SOIC-8L and MSOP-8L packages. The quad-channel LTC8878 is offered in both SOIC-14L and TSSOP-14L packages.

Advantages And Characteristics

  • Low Input Offset Voltage: ± 350 μV Maximum
  • Wide Unity-Gain Bandwidth: 20 MHz
  • High Slew Rate: 22 V/μs
  • Fast Settling: 250 ns to 0.1%
  • Low Noise: 8 nV/√Hz at 1 kHz
  • Single 1.8 V to 5.5 V Supply Voltage Range at 0 ℃ to 70 ℃
  • Rail-to-Rail Input and Output
  • Internal RF/EMI Filter
  • Low Supply Current: 1.12 mA at 5 V Supply Per Amplifier
  • Extended Temperature Range: -40℃ to +125℃

Application

  •  Battery-Powered Instruments:
    - Consumer, Industrial, Medical, Notebooks
  •  Audio Outputs
  •  Motor Phase Current Sense
  •  Photodiode Amplification
  •  Sensor Signal Conditioning:
    - Sensor Interfaces, Loop-Powered, Active Filters


 
Friendship Link Baidu